Product Description:
Long Shelf-Life Water Based Mold Release Agent For Shoe Material Application
When creating shoe materials, a type of environmentally friendly liquid known as water-based release agents are often used as a way to easily separate the material from the mold. This liquid has great adhesion and separation properties, and is used to facilitate the easy removal of any formed shoe materials.
The process begins with the shoe material being placed on a suitable workbench. After ensuring that the water-based mold release agent is in an intact bottle and that it is stirred properly, it is sprayed onto the surface with specialized spraying equipment. While spraying, it’s important to keep a steady distance and angle to avoid excess or unevenly spread out spraying.
Once the spraying is done, the shoe material must be allowed to air dry slightly to make sure that the water-based release agent is able to fully adhere to the surface of the material. This usually only takes a few minutes.
After the water-based release agent is completely dried, the shoe material can be put into a mold for molding. Thanks to the separation properties of the water-based release agent, the materials can effortlessly detach from the mold without damaging the surface of the shoe materials.
Features:
Using water-based release agent can help to protect the environment instead of using traditional solvent based release agent as it does not contain any harmful substances and results in less environmental pollution, meeting the modern standards.
It is also safer for the operator's health since it does not contain any harmful solvents and does not produce toxic gases while spraying, decreasing the possibility of fire.
Water based release agents are relatively easy to use, especially since it has better flowability when sprayed on shoe materials. Spraying on the surface of shoe materials offers more even application and improves work efficiency rather than traditional brushing procedures.
Concerning the demolding effect, it is largely improved with the help of water-based release agents. It enables a strong demolding effect, avoiding adhesion between the shoe material and the mold while the release force is small.
Apart from those features, it is also less expensive. Since it uses water as the solvent, it does not need to be purchased and can even be reused, cuting down the cost.
Technical Parameters:
| Parameter |
Value |
| Application |
Mold Release |
| Product Name |
Water Based Shoe Material Mold Release Agent |
| Environmental Friendly |
Yes |
| Solubility |
Soluble |
| Shelf Life |
Long |
| Type |
Water Based |
| Safety |
High |
| Color |
Transparent |
| Odor |
Odorless |
| After-sales service |
Yes |
Applications:
Water-Based Release Agent: Improve Production Efficiency and Quality, Reduce Losses and Defects, and Protect the Environment
Water-based release agent is a product used to help the removal of materials used in making shoes, such as leather, sports, and sandal shoes. The agent forms a film on the material's surface by reducing the adhesion between the shoe material and the mold, thereby allowing the mold to break away from the surface. This can result in an increased production efficiency and improved quality, lower wastage during molding processes, and increase the mold's longevity.
In addition, the release agent offers environmental protection and easy cleaning characteristics, this can help reduce the possibility of environmental pollution. To sum up, water-based release agents provide a number of advantages in the shoe production industry, such as improved production efficiency and quality, reduced losses and defects, and protection of the environment.
Packing and Shipping:
The Water Based Mold Release Agent is packed in 25-litre drums. It is then shipped in cardboard boxes or cartons, depending on the quantity.
FAQ:
Q1: What is DELTA Water Based Mold Release Agent?
A1: DELTA Water Based Mold Release Agent (Model Number: DT-3186-262) is a product used to reduce adhesion between the surface of the mold and the material, making it easier to separate the two.
Q2: Where is DELTA Water Based Mold Release Agent manufactured?
A2: DELTA Water Based Mold Release Agent (Model Number: DT-3186-262) is manufactured in China and certified by ISO9001.
Q3: What is the minimum order quantity of DELTA Water Based Mold Release Agent?
A3: The minimum order quantity of DELTA Water Based Mold Release Agent (Model Number: DT-3186-262) is 1kg.
Q4: How much does DELTA Water Based Mold Release Agent cost?
A4: The price of DELTA Water Based Mold Release Agent (Model Number: DT-3186-262) is negotiable.
Q5: How is DELTA Water Based Mold Release Agent packaged and delivered?
A5: DELTA Water Based Mold Release Agent (Model Number: DT-3186-262) is packaged in 25kg/ barrel and can be delivered within 15 work days after payment is received (payment terms: 100% TT before shipment). The supply ability is 2000 tons per month.
Your message must be between 20-3,000 characters!
