Transparent Mold Release Agent Water Based Environmental Friendly

Product Description:

Transparent Solution Mold Release Agent For Environmental Friendly B2B Buyers

When making shoe materials, we usually use water-based release agents to separate the shoe material from the mold, in order to facilitate the removal of the formed shoe material. Water-based release agent is an environmentally friendly liquid with good adhesion and separation performance.

Before spraying water-based release agent, we first place the shoe material on a suitable workbench. Then, we take out a bottle of water-based mold release agent, ensure that the bottle is intact, and stir evenly to fully mix the ingredients.

Next, we can use specialized spraying equipment to evenly spray the water-based release agent onto the surface of the shoe material. When spraying, we need to maintain appropriate distance and angle to avoid uneven or excessive spraying.

Once the spraying is completed, we can air dry the shoe material slightly to ensure that the water-based release agent can fully adhere to the surface of the shoe material. Usually, this process only takes a few minutes.

After the water-based release agent is fully dried, we can put the shoe material into the mold for molding. Due to the separation performance of water-based release agents, shoe materials can easily detach from the mold without causing any damage to the surface of the shoe material.

Features:

Environmental protection: Water-based release agents use water as a solvent, which is more ecological friendly than traditional solvent based release agents. It does not contain harmful chemical agents and has less emission of polluting substances, meeting modern requirements of sustainability.

Safety: Water-based release agents do not contain noxious solvents and do not produce toxic gases during any phases of their use, posing no harm to the health of operators. At the same time, it has a high flash point and is less likely to cause a fire.

Easy to operate: When water-based release agents are sprayed on shoe materials, their coating texture is relatively stable, and have good dispersion quality and ease of application. Compared with traditional brushing methods, spraying can be more evenly applied to the surface of shoe materials, increasing the efficiency.

Good demolding effect: The water-based demolding agent has a good demolding effect, which can effectively prevent binding between the shoe material and the mold. After using water-based release agents, the release force is relatively smaller, the surface of the shoe material is smooth, and it does not affect the appearance quality of the shoes.

Low cost: Comparing with traditional solvent based release agents, water-based release agents are more cost-competitive. Water as a solvent does not need to be purchased, and the water-based release agent can be recirculated, reducing the cost of use.

Technical Parameters:

Applications:

Water-based release agents are products used for spraying on the surface of shoe materials, designed to facilitate the release operation of shoe materials. They can be applied to various shoe materials such as leather shoes, sports shoes, sandals, etc.

When used, they will form a thin film on the surface of shoe materials, a layer that can reduce the adhesion of the shoe material to the mold. This makes it easier to detach the mold from the shoe material, improving production efficiency and quality, reducing losses and defects in the demolding operation and extending the life of the mold.

Not only can water-based release agents make an impact on production operations, but they also have the added advantage of being environmentally friendly and easy to clean, thus reducing environmental pollution.

In summary, the application of water-based release agents serves to improve the production efficiency and quality of shoe materials, reduce losses and defects, and prioritize the care of the environment.

Packing and Shipping:

Water Based Mold Release Agent is usually shipped in 5-gallon pails, 55-gallon drums, or 275-gallon totes. It should be shipped according to the UN Hazard Classification of the product to ensure safe handling and transport. Shipping documentation should include a Safety Data Sheet (SDS) that provides information about the product, its hazards, and handling instructions. The material should be packaged in sealed containers to prevent contamination and spills.

FAQ:

• Q: What is the brand name of the Water Based Mold Release Agent?
  A: The brand name is DELTA.
• Q: What is the model number of the Water Based Mold Release Agent?
  A: The model number is DT-3186-262.
• Q: Where is the Water Based Mold Release Agent manufactured?
  A: The Water Based Mold Release Agent is manufactured in China.
• Q: Does the Water Based Mold Release Agent have ISO9001 certification?
  A: Yes, the Water Based Mold Release Agent is ISO9001 certified.
• Q: What is the minimum order quantity for the Water Based Mold Release Agent?
  A: The minimum order quantity is 1kg.